Activating Voice Calling on Huawei HSPA modems

by Ruchira on February 26, 2010

Update 2013 – Since this method no longer works, I have added a new guide – https://www.ruchirablog.com/unlock-voice-huawei-hspa/

On my previous post I wrote about how to unlock huawei modem models. So there is another great option in most of Huawei new HSDPA modems (In cheaper models too) . Today I will show you how to actviate voice calling feature hidden on your huawei medem. I have used E156G and it works on this models too. Huawei E156 / E156B / E156C / E156G

First of all you need to download this piece of small software to check if your modem suports voice calls ( No matter if the feature disabled in factory settings we are going to activate it. So its worth to check)

Download it here- http://www.dc-unlocker.com/downloads/get/03FpJrhM

And run it after installing.Make sure to exit Mobile partner otherwise the software wont detect the HSPA modem. And after opening it click scan. it will then display the details of the plugged huawei modem like this-

Voice calling huawei

Look there is a option called Voice Feature. In this screen shot it shows enabled because I already enabled it. In your computer it will show Disabled if your have voice calling option if not it will show Not supported.

So if your software shows Voice Feature – Disabled then its the time to enable it. Click the option called Server in the DC-Unlocker software. It can unlock your locked modem too but it require 20 euros. But it doesnt require money to enable voice feature.

In the user name and password field enter these-

Username- Free

Password- Voice

Then click “check login”. SO DC-Unlocker will login free to unlock voice feature. Like this-

Huawei voice calling

 

Then browse to “Unlocking” section of DC-Unlocker client and click “Activate Voice”. then it will unlock your voice calling feature! 😀

Wait there some other things to done in software section too. You need to update to Voice calling version of mobile partner software because 95% of modems come without voice calling Mobile partner version. Download the voice calling version here- http://www.dc-unlocker.com/downloads/get/LihV26NW

Warning you are going to flash your Huawei modem with this new version. your current connection profile settings will be lost because of new update. And always remember to update the firmware in a steady power sourced computer. Because if your computer gets stuck or powerloss when updating firmware ( which will take 5~15mins) your modems firmware will be corrupted. So be sure you have steady power source to use with your computer when flashing.

After downloading the New Mobile Partner firmware run it and it will update your current firmware. Voila you have new Mobile parnter with voice calling feature like this!

 

Activated voice

PS- To keep in touch with more hacks and you can subscribe to my email feed. No advertising or spam will be sent. You can unsubscribe at anytime! 🙂

Enter your email address:

I'm Ruchira Sahan and all posts on this blog are completely my thoughts and writings. I love DIY and Technology. So feel free to contact me for anything about this blog and don't forget to add a comment if this blog helped you! Thanks
Ruchira
View all posts by Ruchira

{ 195 comments… read them below or add one }

1 macciavelli March 11, 2010 at 3:24 PM

Thanks for your comprehensive guide!

Unfortunately, it does not work any more. The DC unlocker says “Insufficient credits !”

Wonder if there are any other means of unlocking voice calling.

Thanks again.

Screenshot: http://yfrog.com/1n21740598p

Reply

2 mazin March 20, 2010 at 11:58 PM

Dear,
It worked wonderfully,
but when i insert the modem into my PC, (3 UK modem), i do still get the 3 Software of that company running!
I close it and then i go to my desktop and click on Mobile Partner and then the beautiful blue screen comes up.
Is there anyway i can permenently remove the 3 software from this modem completely and just have that mobile partner runs as a default?!

Reply

3 guest September 3, 2010 at 10:19 AM

hi, i followed ths instruction to enable voice on the E180. But the ID 'Free' and password 'Voice' does not work. any other combinations I can try ?

Reply

4 Asif Khan April 5, 2012 at 4:43 AM

yes u can
use free and voice
not Free and Voice
because case is sensitive

Reply

5 RuchiraBlog September 3, 2010 at 7:44 PM

Sorry gaksan,
Its no longer free! Now you have to pay for the software! 🙁

Reply

6 Abc September 6, 2010 at 8:45 PM

This is not Mobile Partner firmware that you can flash. It’s only connection manager that you can install on your computer, but not flash your modem.

Reply

7 Thaya September 7, 2010 at 11:42 AM

When I try click on the Activate Voice button .. following error was thrown n not unlocked….

Activating voice for Huawei datacards Huawei E156/E156G …

Insufficient credits !

Please help ….

Daya

Reply

8 Anonymous September 7, 2010 at 11:50 AM

Its no longer free! Now you have to pay for the software! 🙁

Reply

9 USB 3G Viettel September 14, 2010 at 7:17 AM

thanks for sharing

Reply

10 sheriff September 16, 2010 at 5:23 PM

great job man! worth coming here…. keep it up

Reply

11 Ruchira September 17, 2010 at 2:24 AM

thanks for your feedback!

Reply

12 Pramdth September 18, 2010 at 4:55 AM

thanx buddy

Reply

13 Teba October 7, 2010 at 4:49 AM

i followed the procedure to enable voice calls on E1552 and updated to given mobile partner, tested once and it worked then when i redailed, it couldn’t respond. To test again with dc unlocker Voice was disabled again. Now problem access denied. Is there any other way to enable voice calls. For unlocking i used the free server to unlock it http://www.a-zgsm.com/huawei.php?act=submit

Reply

14 rimzad October 21, 2010 at 11:06 AM

will voice call thing work for e1550??? please tell me… amd do u knw how break call baring??

Reply

15 akmal October 26, 2010 at 7:57 AM

itz work nicly………. thannkz
how to unlock vedio call…………?????????

Reply

16 Ruchira October 26, 2010 at 8:03 AM

Hello,
Thank you for your feedback! This kind of things makes me write new things! 🙂

Reply

17 kLik November 1, 2010 at 10:45 PM

just try mine….
when trying to activate.
error come out with port unavailable….
what should i do

Reply

18 Ruchira November 1, 2010 at 10:48 PM

Hello,
Can you tell me what OS that you using and are you sure the modem plugged in to PC correctly?
Thanks

Reply

19 Bombom November 11, 2010 at 9:31 AM

I JUST INSTALLED IT!! AND IT WORKS!!! tHANKS A LOT DUDE!!! 😉

Reply

20 kaushy November 19, 2010 at 1:22 AM

Please publish the flash file download link. Ss it in the mobile partner itself?

Reply

21 Ruchira November 19, 2010 at 1:30 AM

This software is no longer free! You need to pay it to use it! 🙁

Reply

22 Ruchira November 19, 2010 at 5:04 AM

which flash file are you referring to?

Reply

23 Mangala Edirisinghe November 20, 2010 at 1:17 PM

tank you sahodaraya, we want people like you. I’m proud to be a Sri Lanken. Jaya Sri

Reply

24 Ruchira November 20, 2010 at 7:00 PM

thanks bro! 🙂 Jaya Sri!

Reply

25 Lihil November 27, 2010 at 10:33 AM

Niyamai macho. Mama hoya hoya hitapu deyak hamba una. Siravatama meka vada. Elaz. niyama Sri Lankikayek !!!

Reply

26 John November 28, 2010 at 10:40 PM

I have activated the phonepart. I can ring in and out. But there is no sound?
What should I do?
Thanks for the great work you are doing!

Reply

27 Ruchira November 29, 2010 at 3:07 AM

Yes you cant hear the sound means that modem is locked on voice part. This guide to unlock it is not working now because now its paid software.

Reply

28 rashed khan December 22, 2010 at 8:23 AM

r u have the voice call plugins software.if have then mail me (rashed.khan82@yahoo.com).please.
or mail the driver software you have.

Reply

29 janpan December 24, 2010 at 10:45 AM

Is there any way to activate the voice call for free and WITHOUT DCUnlocker. Does anybody know the corresponding AT command?

Reply

30 Ruchira December 24, 2010 at 10:49 AM

Well Im sure there is a method using AT commands why not right? 🙂 Ill definitely test new things if I got a HSPA modem now. but unfortunately I dont have a modem to test things out so I dont like to post with confidence without doing it myself! 🙂

Reply

31 ceyan lara December 27, 2010 at 6:50 AM

this is good trick but cant recharge the account by this but i can call to others can i get a solution? (connection-mobitel modem e1550)

Reply

32 Ruchira December 28, 2010 at 8:41 AM

why cant you recharge?

Reply

33 ceyan lara December 28, 2010 at 9:31 PM

cant get call to *102*(pin number of card)# it says cant be create your call ……………

Reply

34 Ruchira December 29, 2010 at 2:51 AM

this might be a problem with your network!

Reply

35 Theary December 29, 2010 at 10:03 PM

Hi
when i finished my installation i can not make a call because some of function like call button, send button is disabled , so i can not make a call or sms, pls help me

thanks
waiting your answer to me soon.

Reply

36 Ruchira December 30, 2010 at 6:33 AM

actually even without unlocking voice you should be able to make calls but you cant hear or tell something to other side. Looks like your sim calling function disabled!

Reply

37 ceyan lara January 3, 2011 at 5:07 AM

now it’s ok now i can recharge my account……….
this is the link u can download the mobile partner
that u can enable every features like wlan,adsl,vedio call,mms ,call log

***********Link removed******************
I dont recommend using third party modified software versions because it can contain virus!

also if u want to active video call do this
go to mobilepartner’s installation folder find out the file SysSetting.xml and do this modification open it in notepad and find the phrace call and change 0 to 1 now u can get a video call from u’r pc

Reply

38 ceyan lara January 3, 2011 at 5:12 AM

sorry there’s a mistake read this:-
also if u want to active video call do this
go to mobilepartner’s installation folder find out the file SysSetting.xml and do this modification open it in notepad and find the phrace call ” “and change “0” to “1” now u can get a video call from u’r pc

Reply

39 coronagh January 11, 2011 at 5:11 AM

Ruchira thanks very much for the good work you doing. I downloaded the software and everything just worked perfectly. keep in up man.

Reply

40 mandeep January 23, 2011 at 3:38 AM

Hi,

blog is nice and informatory.

I am using Micromax “MMX310G” 3G usb Modem, Can you let me know how could i make voice call from this modem through my PC

Thanks

Reply

41 Ruchira January 23, 2011 at 4:44 AM

I dont know micromax support this feature or not! Does micromax based on huawei hardware? Or its just huawei modem rebranding?

Reply

42 Mandeep January 25, 2011 at 7:43 AM

Ruchira,

I don’t know wether it relates to huawei in any way or not, co. I am not that technical iin hardware.
But I have downloaded the program “DCUnlocker”, I had installed it too. But it didn’t detects my modem. to show the features.

Thanks

Reply

43 Ruchira January 25, 2011 at 8:59 AM

it might be because your modem isnt huawei. 🙂 there are many other HSPA modems now a days! please find your modems manufacturer!

Reply

44 Mandeep January 25, 2011 at 7:43 AM

And offcource, pl. let me know the link to download the “Mobile Partner”

Thanks

Reply

45 Ruchira January 25, 2011 at 9:01 AM
46 Sandip January 26, 2011 at 6:49 AM

very bad software what a hell is this? you are just a foolish worst software

Reply

47 Ruchira January 26, 2011 at 7:35 AM

Reading this comment made my day! 🙂 lol I can spend today with laughs 😀

Reply

48 Sandeep Yadav January 27, 2011 at 2:56 AM

Visit http://www.xxxxxxxxxxxxxxxxx(spam) for buy unlock software and firmwares. I like very much Ruchira Blog Thanx

Reply

49 niroshan January 28, 2011 at 1:03 PM

Ruchira,
i have E 1550 modem and thank man i can call now

the network i use needs to dial *100# to check credit balance
it dials but in the phone the reply is displayed in the screen…
but how do i know the balance after i dial the cod in this software as it does not show anything?

Niyamai oyage sevaya.
jaya wewa…!!!

Reply

50 Ruchira January 29, 2011 at 7:31 AM

Hello Niroshan,
You need to dial the numbers in USSD prompt. There is option called USSD in huawei mobile partner. It will display the credits and other such thing like on phone! If you dont have USSD option upgrade your mobile partner.

Reply

51 Roland February 1, 2011 at 1:42 AM

Hello,

I’ve activated the voice functionality and can make a call with Mobile Partner. My question is, if I can use the modem for voice calling from a third party software. For example I develop an application, and from this application the user can make a call. Do you know any driver or solution to do so?

Thank you,
Roland

Reply

52 Ruchira February 1, 2011 at 6:03 AM

that depends on how are you willing to get the call!

Reply

53 Roland February 1, 2011 at 11:41 AM

Dear Ruchira,

Thank you for the quick response! So I would like to use the USB modem as a phone for voice calls, from a software. So when I click on a button in my application, it dials the number, and using the computer mic and speaker, the user can talk with the other party. Basically the same functionality as the Voice modem some years ago.

Bests,
Roland

Reply

54 Ruchira February 1, 2011 at 7:19 PM

Hello,
This functionality is already in the mobile partner software! You can dial the number and get calls using your PC mic and speakers. Also you can receive calls and you can assign ring tones too!

Reply

55 Roland February 2, 2011 at 12:37 AM

Dear Ruchira,

Yes, you’re absolutely right. But I want the same functionality in my own application, which can do more then just a dialer. So I wonder if there’s any API or SDK for these USB GSM modems.

Thank you,
Roland

Reply

56 Ruchira February 2, 2011 at 5:46 AM

well for now there is no API for mobile partner or huawei modems. You will need to reverse engineer mobile partner or request codes from huawei! They might help you! 🙂

Reply

57 Roland February 2, 2011 at 11:19 AM

OK, thanks anyway 🙂

58 niroshan February 2, 2011 at 8:49 PM

Thanks Ruchira, I no longer have to remove my sim card every time i want to subscribe for internet service for 24 hrs and my phone is also not getting damaged. Thanks …

Reply

59 SL guy February 5, 2011 at 6:29 AM

hey i want to know that can voice call be activated in huawei e 220 usb modem? .. pls anyone try it ?

Reply

60 anurag February 5, 2011 at 9:41 AM

Hi Ruchira,
my huwaei E156gG modem was already unlocked when i purchased it .
I want to enable voice feature on it .Unfortunately, it does not work any more. The DC unlocker says “Insufficient credits !
is there any other way you know to enable voice on this modem ?

Thanks

Reply

61 Thilina Jayawardana February 11, 2011 at 9:46 AM

This is really helpful bro. hope you will tell some other secrets soon

Reply

62 reetesh February 14, 2011 at 7:34 AM

accourding to you i have come upto unlocking and click active voice,the result shows port unavailable please get me complete help to shortout this problem

Reply

63 Ranjana February 15, 2011 at 7:16 AM

DC unlocker says “Insufficient credits !
Help me.

Reply

64 sethu February 25, 2011 at 12:15 AM

hai ……
pls pls pls pls help me to enable my voice feature in huawei e156g usb modem …

i unlocked as said in the previous thread .
but when trying to use dc-unlocker to enable voice feature it always showing “error connecting to server”

pls tell me the solution to get rid out of this..

also tell is there any offline method to enable that voice feature or any other software and its download link

pls pls pls pls
thanks in advance

Reply

65 sethu February 25, 2011 at 12:20 AM

i also add a word that im from india ..
and i need ur ideas to enable that feature…

Reply

66 pankaj February 28, 2011 at 3:01 AM

hello
I am having huawei modem e1752 with mobile partner software having voice call feature.
I don’t know how this can be used .kindly tell the procedure for this modem for calling through this modem

pankaj

Reply

67 pankaj February 28, 2011 at 11:50 AM

hello
i have tried the dc unlocking software.it is showing voice call deactivated.
when i m giving username and password as free and voice respectively and checking login ,it is showing error connecting to server,
kindly suggest what to do now .i am giving detail of dc unlocker as-
Found modem : E1752
Model : Huawei E1752
Firmware : 11.126.03.01.314
Dashboard version : UTPS16.001.05.00.45_MAC15.001.08.01.45_LNX15.001.08.01.45
Serial NR. : O45TAA1052614604
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)
===================================================================
Error connecting to server !
===================================================================
Error connecting to server !
===================================================================

Reply

68 Ruchira February 28, 2011 at 7:12 PM

Sorry bro,
Now this cant be done for free. You need to purchase credits with dc-unlocker!

Reply

69 sriram March 11, 2011 at 11:52 PM

first of all thank you for posting this type of tricks
my voice calls are enabled but when i am activating voice calls it shows “port not found ”
error what is this

Reply

70 sriram March 12, 2011 at 4:23 AM

once again thank u
there are any side effects on the modem when we enable the voice calls

Reply

71 Ruchira March 12, 2011 at 4:44 AM

no

Reply

72 suman March 12, 2011 at 11:36 PM

hi ruchira
thanks for ur good work..

i have a query… my e160 modem (which is HSPDA/3G spec) is only working at 2G speed (i.e 5-10KBps or 40-80kbps) both on BSNL 3G SIM or DOCOMO 3G SIM…. Do i need to make some settings for it to work at 3G speed?? I have searched lot of forums on google but in vain..

i hope u can help me on this
thanks in adv
suman

Reply

73 Ruchira March 14, 2011 at 5:12 AM

maybe you dont getting 3g signal! Check with mobile phone to verify you getting 3g signal or not! Still India got very poor 3g coverage so I guess thats the problem!

Reply

74 samresh March 14, 2011 at 3:18 AM

After installation this software then i start it give an error message file corrupted. this is not work

Reply

75 pasan March 14, 2011 at 8:34 AM

Hi Ruchira, thanks for having all the info in one place, I was able to unlock, enable voice and flash the voice enabled version of Mobile Partner thanks to you.

Reply

76 jeiboi March 19, 2011 at 4:19 PM

thanks! you’re the man@# i love you.

Reply

77 jeiboi March 19, 2011 at 4:20 PM

one more. can you link home network via internet instead of roaming.

Reply

78 jeiboi March 19, 2011 at 4:27 PM

like plug n talk gadget, launched by SMART Philippines.

Reply

79 Ruchira March 19, 2011 at 8:43 PM

what??

Reply

80 jeiboi March 20, 2011 at 4:12 AM

I want to use my Philippine SIM card here in Dubai,using Huawei E180, not in roaming but I want to connect directly to Smart Network Philippines through internet. Like this one. http://www.plugntalkload.com/

Reply

81 jeiboi March 20, 2011 at 4:38 AM

IN SHORT HOW CAN I DOWNLOAD PLUG N TALK SOFTPHONE?. THANKS.

Reply

82 samresh March 23, 2011 at 7:15 PM

hi, i followed ths instruction to enable voice on the E180. But the ID ‘Free’ and password ‘Voice’ does not work. any other combinations I can try ?

Reply

83 P R Sakila April 2, 2011 at 7:56 PM

i try to unlock voice for my huawei e1550 but it ddnt work
pls help me to unlock the voice on my domgle

Reply

84 mx April 7, 2011 at 6:04 PM

it is not free anymore……

Reply

85 Walexido April 9, 2011 at 7:44 AM

please is there any other username and password

DC – Unlocker 2 Client 1.00.0416

Detecting card :

selection :
manufacturer – Huawei datacards
model – Auto detect

Found modem : E156G
Model : Huawei E156/E156G
IMEI : 357133038272447
Firmware : 11.608.08.81.00
Dashboard version : UTPS16.002.03.00.67
SIM Lock status : unlocked
Voice feature : enabled
Wrong codes entered : 0 (unlock attempts left : 10)

===================================================================

Activating voice for Huawei datacards Huawei E156/E156G …

Error connecting to server !

Reply

86 mohsen April 14, 2011 at 4:07 AM

hi,
help me
why when i click on Activate voice show me ” Insufficient credits ! “

Reply

87 PaPaLemon April 27, 2011 at 10:13 PM

because the free period ended 1 year ago.

Reply

88 kammy April 28, 2011 at 7:48 AM

i do us huwei e1550 and i have install Mobile_Partner_11.302.09.01.539_Voice_USSD.i can to enter out-going call and call receive but i can’t to lesten any speck.please give soletion it’s.

Reply

89 Ruchira April 28, 2011 at 8:21 AM

thats because voice is locked!

Reply

90 James April 30, 2011 at 1:46 PM

Please is there any other way of enabling the Huawai Modem , because the DC UNLOCKER need say insufficient credit, when we use the FREE and VOICE datails

Reply

91 Pubudu May 4, 2011 at 4:44 AM

Hey now they said.
Dashboard version : UTPS11.030.01.04.03
Serial NR. : DT5TAB1961804125
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)

===================================================================

Activating voice for Huawei datacards Huawei E176 …

Insufficient credits !

Reply

92 ves10 May 9, 2011 at 2:01 PM

this was well explained,even if i used a different app to unlock but still more thank you, well thank you!

Reply

93 Ruchira May 9, 2011 at 11:59 PM

whats the application that you used?

Reply

94 vincent May 10, 2011 at 5:35 AM

hey but you did not say how to flash the firmware! that software will only get installed on the pc thats all but no changes to the software which comes with the modem itself.

Reply

95 Ruchira May 10, 2011 at 6:51 AM

firmware update changes the software on your modem!

Reply

96 vincent May 10, 2011 at 7:37 AM

i mean the downloaded software from the lik http://www.dc-unlocker.com/downloads/get/LihV26NW which you provided does not flash the firmware instead it only installs on the pc…
nothing happens to the default software one in the modem.

Reply

97 vincent May 10, 2011 at 7:39 AM

how ever i just downloaded another one from http://panatar.com/mobile_partner_voice_ussd.zip
but i will wait for your comment just in case i might be doing something wrong.

Reply

98 Ruchira May 10, 2011 at 9:56 AM

go ahead but I think its the same file might be version is different!

Reply

99 Siva October 24, 2011 at 4:42 AM

http://panatar.com/mobile_partner_voice_ussd.zip this link works, its awesome. Thank you Vincent.alert(5)

Reply

100 Channa May 17, 2011 at 5:57 AM

Are there any other thing using dc unlocker to activate voice in my e176. dc unlocker always ask credits…..pls reply……

Reply

101 josephine May 19, 2011 at 1:35 PM

how do i activate the modem to call

Reply

102 benolam June 9, 2011 at 6:23 AM

Using E172. Voice is enabled, call menu appears in Mobile Partner, can make and receive calls but there is no sound in either direction. On same PC with same SIM, it all works with a E1750.

Any ideas?

Reply

103 PRANAV June 17, 2011 at 10:26 AM

I had bought huawai e1550 a year ago but there is no voice call setup . can i call by downloading a updated version ? kindly reply

Reply

104 Adeoye Alabi June 20, 2011 at 2:10 PM

Thank you 4 great work please i need your help on activating voice feature in my huawei modem eg162g.i have flashed with other versions like e180 e160g stil it is not activated i do i go about it again i am stalked

Reply

105 kiprono mongitoz July 1, 2011 at 3:36 PM

pliz help with code to unlock my modem model:E153u-2
IMEI:352374045497446 pliz help

Reply

106 greencross July 17, 2011 at 4:06 AM

try this link: https://www.ruchirablog.com/unlocking-huawei-hspa-modem-for-free/
and follow the instructions.

Reply

107 santhosh July 19, 2011 at 12:24 PM

whenn i am treing to activate voice of my E1731 modem it says

Activating voice for Huawei datacards _Unknown Huawei modem_ …

Insufficient credits !

pls help me……..

Reply

108 lyazi sharif March 16, 2012 at 5:27 AM

i am crying for help, because my modem can not make calls

Reply

109 deep July 19, 2011 at 10:20 PM

sir ,i am using huwai umg1831 3g modem, can u tell how to enable voice and video call?

Reply

110 Prem July 31, 2011 at 4:42 AM

sir plz send dc unlocker user name and password its urgent sir i am very glad to you

Reply

111 toni August 14, 2011 at 9:39 AM

dear ruchira,

is there a voice abled mobile patner for apple macintosh (v10.6) somewhere?

thanks for help
toni

Reply

112 prince August 14, 2011 at 9:38 PM

how to replace t-mobile web connect manager dashboard with mobile partner in umg 1831..not in the pc but in the modem…plz help

Reply

113 v August 15, 2011 at 2:12 AM

this dc-unlocker do not find zte k3570-z model data card. please help

Reply

114 teman August 20, 2011 at 9:39 PM

Hi greetings,

i have problem to when doing unlock still insufficient credits, is there any user can be used mate, but thank for bringing usefull articles, nice reading it.

Reply

115 Ruchira August 20, 2011 at 10:39 PM

its not free with dc-unlocker now 🙁

Reply

116 soloke August 22, 2011 at 8:13 PM

activating voice is not free; Is there any way to enable voice in huawei e1552

Reply

117 nimal August 27, 2011 at 3:01 AM

Are you know other software to active voice call free

Reply

118 perry September 3, 2011 at 11:58 AM

pls help me remove the dashboard on my modem and put a new dashboard

Reply

119 austin September 7, 2011 at 5:48 AM

Hi, would anyone happen to know how one can configure a java program event listener to make a call-log based on incoming calls to the modem? I am trying to make a software in Java that would help me to log all my incoming calls and messages, which requires the event listener. Any help will be highly appreciated.

Reply

120 NErid September 9, 2011 at 9:59 PM

man i was looking f dz..thnx again]

Reply

121 vik September 11, 2011 at 1:18 AM

i am using huawei E1731 (Airtel) …. what i can do for making phone call

Reply

122 mano September 24, 2011 at 10:28 AM

i am using huawei E1731 (Airtel) …. what i can do for making phone call

Reply

123 nitin September 15, 2011 at 10:43 AM

sir,i have problem in enabling voice function in my e156g modern pl help me out,one thing more how to activate 3g in 2g plans in idea like there in bsnl

Reply

124 reyhito October 17, 2011 at 3:12 AM

Error connecting to server ! ????
help me

Reply

125 sunil044@ymail.com October 31, 2011 at 1:51 AM

PLS GOOGLE IN SEARCH ———ONLINE UNLOCKINNG MODEL NAME HUWEI MODEM AIRTEL

Reply

126 oti November 1, 2011 at 9:36 AM

please what is diagnostic com port and application com port

Reply

127 sethu November 9, 2011 at 6:11 AM

Hai ruchira…

My friend is having a dongle with credits. He used to unlock iphones. but he dont know the procedure to unlock the huawei e156g for voice function. can u please help me with steps and procedures to unlock modem for voice.

He already unlocked my modem for using any network sim and it works perfectly with all the sim.

please help me to unlock for voice using the dongle.

Reply

128 radha November 16, 2011 at 4:16 AM

Using E172. Voice call not enabled, and Balance message not recived pls help me

Reply

129 faros November 17, 2011 at 2:36 AM

I”ve Huawei E1750 with disable voice .
Is it possible to enable voice feature with AT-command ?
or would it be done for free in future by dc unlocker?

Reply

130 Amit November 19, 2011 at 1:18 AM

Sir voice call not supported in eg162g. can any help me how i can make call. my email id is amit.arya84@gmail.com.

Reply

131 Sunendra Perera December 6, 2011 at 5:41 AM

Plz help me to remove the net work lock from my Hauwei HSDPA E-173 USB stick
Thanks

Reply

132 Pete December 28, 2011 at 11:23 PM

The free username and password works, but when I activate the voice on the unlocking section, a message is displayed that ‘Port Unavailable’.

How can I resolve that?

Reply

133 punit January 6, 2012 at 6:48 AM

I got Huawei ec159 modem of reliance kindly tell me how to unlock the voice call & sms feature, its a prepaid connection but it has memory card & sim card slot, tell me how to unlock it, so that i can use both the features and this version is not listed in the software

Reply

134 kelvin January 10, 2012 at 2:42 PM

Hi Bro! Did you manage to find another way to unlock the voice feature without the DC-Unlocker software?

Reply

135 Snehasis January 12, 2012 at 9:43 AM

selection :
manufacturer – Huawei modems
model – Auto detect (recommended)

Found modem : UMG1831
Model : Huawei UMG1831
IMEI : 356997030372558
Firmware : 11.831.05.01.420
Dashboard version : TMCM_2.05.0016.0
Serial NR. : LI7NAB1051400177
Voice feature : not supported in current firmware
SIM Lock status : unlocked

It seems Voice feature is not supported in my current version of the firmware. How to fix this? Any help is appreciated.

Reply

136 Juan January 15, 2012 at 7:42 PM

I did everything you said here, i even paid 4 euros in order to enable voice feature via dc unlocker, downloaded the mobile partner version with the phone dialer and voilá..its making phone calls, the porblem is ..there´s no audio at all (huawei E156B)..what can I do?

Reply

137 Ruchira January 15, 2012 at 9:38 PM

your voice isnt unlocked thats why you cant hear the audio!

Reply

138 Juan January 15, 2012 at 10:02 PM

the voice feature says “enabled” when i run a dc unlocker scan (thats why i paid the 4 euros) …

Reply

139 satyam January 25, 2012 at 11:40 AM

355013048468791

Reply

140 Ruchira February 15, 2012 at 1:05 AM

IMEI: 355013048468791

Entsperren / Unlock: 46335626
Flashen / Flash: 45799440

Reply

141 ankit January 28, 2012 at 7:09 AM

i am using windows xp 2.on clicking activate voice button it is showing port unavailable.any ideas.

Reply

142 dhiraj February 5, 2012 at 11:31 AM

how can make call from micromax 352g usb modem….plzz mail me the software… dhrjsarma54@gmail.com

Reply

143 Hijas February 12, 2012 at 3:25 AM

DC – Unlocker 2 Client 1.00.0416

Detecting card :

selection :
manufacturer – Huawei datacards
model – Huawei E1550
application port – COM18
diagnostic port – COM19

Found modem : E1550
Model : Huawei E1550
IMEI : 358705030102760
Firmware : 11.608.09.01.21
Dashboard version : 3Connect_BL_3_0_23_0_Mac_r63
Serial NR. : B54CAA1992621209
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)

===================================================================

Activating voice for Huawei datacards Huawei E1550 …

Error connecting to server !

===================================================================

Activating voice for Huawei datacards Huawei E1550 …

Insufficient credits !

===================================================================
How can i activate voice call on my huawei E1550 HELP ME FRIENDSSSSS

Reply

144 iwan February 25, 2012 at 9:39 AM

i have do instruction that you tell but when i push ulock modem button nothing happen, what wrong white that…..can you help me? i use OS win 7 ultimate….thanks

Reply

145 Chamil Sarajith March 2, 2012 at 5:31 AM

Fist of all thank you very much. it is working correctly. It is very useful to me.

Reply

146 kuldeep March 24, 2012 at 12:45 AM

HI Ruchira this is Kuldeep i want to know whether Huawei e122 can make voice call or not. Kindly help with details.Thanks a lot.

Reply

147 Reeshan rai March 30, 2012 at 6:22 AM

i have E1752.
haw to i active vice call on it.
plz help me soon………………….

Reply

148 Reeshan rai March 30, 2012 at 6:24 AM

i have E1752.
how i can enable voice call on it.

Reply

149 Kemndigngaye Kingatal April 4, 2012 at 2:51 AM

Please can you help me get voice activation. I try your way already but every time I need to connect I Receive this kind off message: “access Denied” please help me

Reply

150 Ruofel April 5, 2012 at 2:11 AM

Help Please… i HAve Huawei E156C
And i Followed Exactly What you have shown here..
my problem is.. it says..
“DC-UNLOCKEr DETECTS MONITORING SOFTWARE!!
Uninstall all monitoring software to avoid server disconnection”

please help..

Reply

151 frank April 26, 2012 at 12:00 AM

does the unlocker unlock the modem such that it responds to the voice AT commands eg AT+FCLASS+8 with OK;AT+VSM etc,i am interested because i am developing an appication for voice communication.

please advice.

Reply

152 Ruchira April 27, 2012 at 1:06 AM

No you cant unlock the modem using AT commands

Reply

153 Ruchira April 27, 2012 at 1:06 AM

no you cant unlock modem using AT commands

Reply

154 frank April 27, 2012 at 1:18 AM

am sorry you did not get my question well; my question was after the dc unlocker unlocks your modem for voice,are you able to access the voice command AT commands,eg. AT+FCLASS=8; should return OK.

Reply

155 Edem May 16, 2012 at 7:22 AM

Thanks for all you have done here.
i have gotten to the point where and supposed to check login but its reporting ‘error connecting to server’ i connect to the internet and try again but am receiving ‘wrong user name or password’.
below are my details after scanning.

DC – Unlocker 2 Client 1.00.0857

Detecting card :

selection :
manufacturer – Huawei modems
model – Auto detect (recommended)

Found modem : E153
Model : Huawei E153
IMEI : 356342045563323
Serial NR. : KMA5TA1141110663
Firmware : 11.609.20.00.00
Compile date / time : Dec 14 2010 19:06:45
Hardware ver. : CD1E153M
Dashboard version : UTPS21.005.11.02.200_MAC21.005.11.01.200_LNX21.005.11.00.200
Chipset : Qualcomm MSM6246
NAND Flash : TOSHIBA_TC58NYG0S3CXGJS
Voice feature : disabled
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)

kindly assist.

Reply

156 Ruchira May 16, 2012 at 7:45 AM

IMEI: 356342045563323

Entsperren / Unlock: 59117786
Flashen / Flash: 51010360

Reply

157 Snehasis May 16, 2012 at 10:53 AM

DC – Unlocker 2 Client 1.00.0509

Detecting card :

selection :
manufacturer – Huawei modems
model – Auto detect (recommended)

Found modem : UMG1831
Model : Huawei UMG1831
IMEI : 356997030372558
Firmware : 11.831.05.01.420
Dashboard version : TMCM_2.05.0016.0
Serial NR. : LI7NAB1051400177
Voice feature : not supported in current firmware
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)

How do i proceed with voice call on my modem?

Thanks,
-Snehasis

Reply

158 Edem May 16, 2012 at 7:59 PM

Thanks a lot
Somehow by the time i tried again, the voice was enabled.
greatful

Reply

159 Bana May 27, 2012 at 2:04 AM

Ruchira, this was great. Thanks. I can now receive calls through my E1552 modem. thanks

Reply

160 Biak Kitte June 22, 2012 at 9:23 AM

Bana, how to you do it? I have tried several times, but could not. Please explain to me…!

User : free
Password : OK !
Credits left : 0

===================================================================

Activating voice for Huawei datacards Huawei E1552 …

Insufficient credits !

===================================================================

DC – Unlocker 2 Client 1.00.0416

Detecting card :

selection :
manufacturer – Huawei datacards
model – Huawei E1552
application port – COM77
diagnostic port – COM78

Found modem : E1552
Model : Huawei E1552
IMEI : 358812031788256
Firmware : 11.608.14.15.00
Dashboard version : UTPS11.300.13.00.03_MAC11.301.06.00.03
Serial NR. : Y94CAA1032305359
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)

===================================================================

Please explain to me, please help me!

Reply

161 rtrtr May 27, 2012 at 9:46 AM

Bye,
above… you have written, “So if your software shows Voice Feature – Disabled then its the time to enable it. Click the option called Server in the DC-Unlocker software. It can unlock your locked modem too but it require 20 euros. But it doesnt require money to enable voice feature.”
I did this method but it showed
User : free
Password : OK !
Credits left : 0
===================================================================
Activating voice for Huawei datacards Huawei E1750 …
Insufficient credits !
===================================================================
when people see this, they think if they pay money to get credits their voice will be activated.
Your colleagues and you are spoofing people for a bit of $

Reply

162 Ruchira June 3, 2012 at 10:18 AM

Im not getting paid for any of these. at the time of writing dc-unlocker is giving free voice unlocks and later they demanded money. if you got through comments you can clearly see that! This post is 2 years old and dont make false assumptions if you dont read!

Reply

163 Paul May 31, 2012 at 5:28 PM

Hi, I just wanted to give you a big THANK YOU for posting this handy little guide, it allowed me to finally confirm that I have voice capability on my Huawei E1750 3G dongle.

Now, if anyone knows how I can get stuff to work through my “unlimited browsing” plan from a Windows 7 computer, my life would be a LOT less expensive and I’d have complete computing and internet access everywhere there’s wireless for less than I pay for coffee in a week !

I use a little app called AutoProxy on my Android phones to use the same SIM and “unlimited browsing”. It proxy’s everything through the correct IP address and port, but I have no idea how to do that on Windows7 using my Huawei 3G dongle ??

Please keep up the posts on your blog, this stuff is really interesting and especially the discovery of the free functions available through the dc-unlocker program. Although my modem had already been voice enabled and SIM unlocked, being able to CONFIRM that, AND download the correct Mobile Partner program easily was great.

Reply

164 roshan June 6, 2012 at 12:06 AM

DC – Unlocker 2 Client 1.00.0416

Detecting card :

selection :
manufacturer – Huawei datacards
model – Auto detect

Found modem : E153
Model : _Unknown Huawei modem_
IMEI : 352375049717697
Firmware : 11.609.16.00.00
Dashboard version : UTPS16.001.06.00.03_MAC16.001.09.00.03
Serial NR. : KMA7NA1121812188
SIM Lock status : unknown(read failed)
Voice feature : disabled

sorry, this card not supported !

Please, check manufacturer’s selection !

Reply

165 roshan June 6, 2012 at 12:07 AM

plzzzzzzzzz help meee??

Reply

166 sheva June 7, 2012 at 8:13 AM

I did this method but it showed
User : free
Password : OK !
Credits left : 0
===================================================================
Activating voice for Huawei datacards Huawei E153 …
Insufficient credits !
===================================================================
NB:
what should I do to solve this?

Reply

167 pankaj shukla June 9, 2012 at 8:47 AM

hello after entering username and password it shows ok
then on going to unlocking option and clicking on that it is showing port unavailable
kindly suggest the sollution

Reply

168 klix June 17, 2012 at 11:16 AM

hi! do you know why dc-unlocker can’t connect;”error connecting to server”?

Reply

169 Biak Kitte June 29, 2012 at 10:19 AM

Please help me to activate voice feature. I have tried several time but could not.

User : free
Password : OK !
Credits left : 0

===================================================================

Activating voice for Huawei datacards Huawei E1552 …

Insufficient credits !

===================================================================

DC – Unlocker 2 Client 1.00.0416

Detecting card :

selection :
manufacturer – Huawei datacards
model – Huawei E1552
application port – COM77
diagnostic port – COM78

Found modem : E1552
Model : Huawei E1552
IMEI : 358812031788256
Firmware : 11.608.14.15.00
Dashboard version : UTPS11.300.13.00.03_MAC11.301.06.00.03
Serial NR. : Y94CAA1032305359
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)

===================================================================
What need to Flash? if need,what is to use the code?
Please help me…!!!!

Reply

170 JET July 6, 2012 at 4:22 AM

Shows in DC-UNLOCK that Huawei E220 card is support, so i run the scan and it detects the card but does not even show the voice feature as shown below:

Detecting card :

selection :
manufacturer – Huawei datacards
model – Huawei E220
application port – COM6
diagnostic port – COM7

Found modem : E220
Model : Huawei E220
IMEI :
Firmware : 11.117.09.00.94
Dashboard version : HOSTA33.11.107.01.00.94_MAC11.201.01.00.94
Serial NR. :
SIM Lock status : unlocked

How do i get the E220 to show whether Voice Feature is supported or not?

Reply

171 Paul July 6, 2012 at 9:40 PM

I would like to find a firmware for this device capable of voice. The latest firmware that I’ve found doesn’t contain voice capabilities. I can receive a call, it will ring, but can’t answer it, only gives a nonsense character text instead of allowing me to answer the voice call.

If anyone knows where a firmware with voice included is, please let me know, post a response here please.

Thanks.

Reply

172 daguz July 26, 2012 at 11:11 AM

i got “voice not supported with this firmware”, any chance to point me towards a firmware that would allow enabling ?

Reply

173 Swagg August 23, 2012 at 10:06 AM

Hello guys, am having problem with my modem,
– Manufacturer :huawei
– Model :E173
– Revision :21.017.09.00.314
– Phone IMEI :860016011363673
But am failing to get its unlock code. Ive tried it out with dccraap.exe Client v1.00.0460, but it does not support this model. Help me pliz. Thx.

Reply

174 Ruchira August 24, 2012 at 1:20 AM

Your unlock code is 37831510 and flash code is 61585440

Reply

175 lubda May 21, 2013 at 2:39 PM

please cheat me the code for :866452012195554

Reply

176 Rattanak September 20, 2012 at 1:04 AM

i have E220.
haw to i active vice call on it.
plz help me soon………………….

Reply

177 Prasanna September 24, 2012 at 11:32 PM

I follow that steps but after that

Activating voice for Huawei datacards Huawei E1752 …
Port unavailable

what i can do now
thanks

Reply

178 gayan sasanka September 25, 2012 at 5:55 AM

hi i downloaded mobile partner with voice and video calls but i can’t unlock my dongle it have Voice feature but i can’t unlock it when i press activate voice it says insificient credit. please tell me some way to unlock it for free.

Reply

179 Michael O'Donoghue October 6, 2012 at 3:36 AM

Huawei mobile broadband
model;E1752
IMSI:655073111561473
Hi please help unlock my modem

Reply

180 Md. Junaid October 11, 2012 at 7:14 AM

Thanx a lot buddy……..
it’s working awsome…..

Reply

181 Mohammed October 14, 2012 at 11:05 AM

Hi
Please help me I get (error connecting to server ) when I enter the password or try to activate voice call
And I still can’t activate it

Reply

182 adamso October 14, 2012 at 12:41 PM

please master send me the modem code of Huawei E1552 EMEI:353973045688711

Reply

183 Pera October 30, 2012 at 4:37 AM

IMEI: 353973045688711
Unlock: 64212141
Flash: 56394136
Bye

Reply

184 manish October 18, 2012 at 1:52 PM

how to do for E176

Reply

185 sarat January 5, 2013 at 11:58 AM

an error occurs saying insufficient credits

Reply

186 RedOne01 January 10, 2013 at 1:28 PM

Hi!

Im trying to enable the voice.feature on a Huawei E1750. I bought 10 credits and checked login. All good so far but in the “unlocking” menu the “Activate Voice”-button is shaded and nonfunctional. What am I doing wrong?

Here´s my stats:

Found modem : E1750
Model : Huawei E1750
IMEI : 354818045022065
Serial NR. : H9A4CA1111404125
Firmware : 11.126.07.04.00
Compile date / time : Jan 04 2010 22:50:00
Hardware ver. : CD6ATCPU
Dashboard version : HOST2.0.0.293
Chipset : Qualcomm MSM6290
Voice feature : disabled
SIM Lock status : Locked (Card Lock)
Wrong codes entered : 0 (unlock attempts left : 10)

==================================================================

User : XXXXX
Password : OK !
Credits left : 10

===================================================================

Greatful for all the support!

Reply

187 Ruchira January 11, 2013 at 3:16 AM

maybe that modem doesnt have the voice feature

Reply

188 RedOne01 January 11, 2013 at 5:47 AM

So i finally got it to work. Aparently you have to unlock the SIM Lock first to enable Voice. Good to know next time so you buy enough credits to do the 2 operations.

Reply

189 Biak Kitte January 12, 2013 at 10:10 AM

Please help me to activate voice feature. I have tried several time but could not.

User : free
Password : OK !
Credits left : 0

===================================================================

Activating voice for Huawei datacards Huawei E1552 …

Insufficient credits !

===================================================================

DC – Unlocker 2 Client 1.00.0416

Detecting card :

selection :
manufacturer – Huawei datacards
model – Huawei E1552
application port – COM77
diagnostic port – COM78

Found modem : E1552
Model : Huawei E1552
IMEI : 358812031788256
Firmware : 11.608.14.15.00
Dashboard version : UTPS11.300.13.00.03_MAC11.301.06.00.03
Serial NR. : Y94CAA1032305359
SIM Lock status : unlocked
Voice feature : disabled
Wrong codes entered : 0 (unlock attempts left : 10)

===================================================================
What need to Flash? if need,what is to use the code?
Please help me…!!!!

Reply

190 Ruchira January 12, 2013 at 8:43 PM

this method is no longer free. please search for free methods

Reply

191 Azou January 26, 2013 at 6:08 AM

Je ne comprends pas bien comment flasher le modem Huawei 1552 voulez-vous l’expliquer en détail? Merci.

Reply

192 benla April 9, 2013 at 1:31 PM

hi , when i open dc unlocker client and open server after i go to unlocking i cant clik on activate voice , u khnow why ruchira ? tnahks

Reply

193 benla April 9, 2013 at 1:34 PM

also when i go to flash i have 0000000000000 i cant khnow what to do there , i enter my unlock code and flash code but always i have

Reading flash :
Address : ***********
Size : ************
Please wait…

Error connecting to server !

Reply

194 Shlomo May 3, 2013 at 1:20 AM

What about USB HSUPA Sticks from ZTE?
Are they the same?

Reply

195 Ruchira May 3, 2013 at 8:18 AM

nope they are different

Reply

Leave a Comment

Previous post:

Next post: